Wireless network configuration
This section describes the procedures to configure the wireless network for the Business Services
Gateway (BSG) system.
Prerequisites to wireless network configuration
•
You must have WIRELESS - READ WRITE permission.
•
You must configure DHCP pool settings for the VLAN used for the wireless network.
•
You must configure the radio port as a member port of the VLAN used for the wireless
network.
Wireless network configuration procedures
The following task flow shows the sequence of procedures to perform to configure a wireless
network.
Figure 6 Wireless network configuration procedures
Configuring a wireless network
Complete this procedure to configure a wireless network.
Procedure steps
Step
1
Action
From the BSG navigation pane, select Configuration, LAN, Wireless,
Security tab.
The Security Settings pane appears.
43
Configuration Guide