Table of Contents
Advertisement
Variable
IP Address
Subnet Mask
Peer IP Address
Primary DNS Server
Secondary DNS Server
Peer DNS
Multilink Configuration
On the Multilink Configuration page, you can configure the multilink for T1/E1.
To access this page, select Configuration, WAN, T1/E1, Multilink tab.
Variable definitions
This table describes the variables that appear on the Multilink Configuration page.
Variable
Authentication Required
Server/Client
User Name
Password
Value
The IP address of the PPP/Multilink
interface, if IP Address Assignment is
Manual.
The Subnet Mask for the IP address, if IP
Address Assignment is Manual.
The Peer IP address, if IP Address
Assignment is Manual.
The Primary DNS server IP address, if IP
Address Assignment is Manual.
The Secondary DNS server IP address, if
IP Address Assignment is Manual.
The Peer DNS IP address, if IP Address
Assignment is Manual.
Value
The Authentication Required setting for
the multilink interface.
Options:
Yes—authentication is required. Enables
the Server/Client, User Name, and
Password fields.
No— authentication is not required for
multilink interface.
The default value is NO.
Select Server or Client for authentication.
Options:
Select Server to authenticate your peer at
the time of negotiation.
Select Client to be authenticated by the
peer router.
The User Name required for the Server or
Client that requires authentication.
The password for the specified user.
WAN advanced configuration
Configuration Guide
95
Advertisement
Table of Contents
