Vlan Configuration - Nortel BSG8ew 1.0 Configuration Manual

VLAN configuration

This section describes the procedures for configuring the
settings for the Business Service Gateway (BSG).
VLAN1 is the default VLAN. The BSG provides VLAN1 as a fully functioning VLAN using all
eight ports.
Prerequisites to VLAN configuration
• You must have SYSTEM - READ WRITE, L2 - READ WRITE, and L3 - READ WRITE
permission to access the information on the VLAN configuration panels.
VLAN configuration procedures
The following task flow shows the sequence of procedures to perform to configure a VLAN.
l
v
irtual ocal area network (VLAN)
Configuration Guide
37