Table of Contents
Advertisement
52
SIP configuration
Variable definitions
The following table describes the variables and values for configuring FXS information.
Variable
FXS Channel
Channel Enable
Channel Number
Display Name
Password
Configuring FXO
Complete this procedure to configure FXO information.
Note: Use this procedure to configure the emergency number. You should
configure the emergency number before you use the SIP server. This ensures that
an emergency call originating on your system reaches its destination if the SIP
server becomes unavailable.
Procedure steps
Step
1
2
3
4
5
6
7
8
9
10
NN47928-500
NN47928-500
Value
Select the required FXS channel. Select one of the following
options:
•
Line1
•
Line2
Select this check box to enable the administrative status of the
FXS channel.
The default value is disabled.
Type the FXS channel number.
The maximum length of the channel number is 31 digits.
This field is mandatory.
Type the display name for the FXS Channel.
Type the password to access the FXS Channel.
Action
From the BSG navigation pane, select Configuration, SIP, FXO/FXS, FXO tab.
The Foreign Exchange Office (FXO) Configuration pane appears.
From the FXO Channel list, select Line-1.
Select the Channel Enable check box to enable the FXO channel.
In the Channel Number field, type the FXO line number or SIP user number.
In the Password field, type the password to access the FXO channel.
In the Forward Number field, type the number to which the FXO calls are
forwarded.
In the Ring Count field, type the maximum number of rings within which the
FXO must get the answer from the remote number.
In the Emergency Number field, type the emergency number.
In the On Hook Detection Time field, type the on-hook detection time.
Click Apply.
Advertisement
Table of Contents
