Variable definitions
The following table describes the variables and values for configuring the WEP settings for
WLAN.
Variable
SSID
Key Index
Set this as default WEP Key
Key Type
Key Size
Key Value
Wireless multimedia configuration parameters
The following section describes the parameters for advanced configuration of the Wireless
Multimedia (WMM) located at Configuration,
Value
Select the SSID you require to configure WEP settings.
The key used for data encryption.
Options:
1
2
3
4
If you want to assign the selected key index as the default value, you must
select the Set this as default WEP key.
If you select this box, you can configure the selected key index as the
default value.
The default for the first configured WEP is checked.
The default for subsequent configured WEPs is unchecked.
The required WEP key type, which is the default secret key type.
Options:
Hex—the manual string is a string of HEX numbers
ASCII—the pass-phrase is an ASCII character string.
The required key size.
Options:
64 Bit
128 Bit
152 Bit.
The default value is 64 Bit.
The WEP key value.
LAN, Wireless, WMM
LAN advanced configuration
tab.
Configuration Guide
107