Table of Contents
Advertisement
To access this page, select Configuration, WAN, T1/E1, Channel Group tab.
Variable definitions
This table describes the variables that appear on the T1/E1 Channel Group Configuration page.
Variable
Interface
Channel Group Index
Time Slot
PPP Configuration
On the Point to Point Protocol (PPP) configuration page, you can configure the PPP page and layer
it above the serial interface (channel group).
To access this page, select Configuration, WAN, T1/E1, PPP Configuration tab.
Variable definition
This table describes the variables that appear on the PPP Configuration page.
Variable
Serial Interface
Authentication Required
Value
The T1/E1 interface on which you create
the channel group.
Options:
t1e1-1
t1e1-2
The Channel Group Index.
The range is 1to 64.
The time slots.
The range is 1to 24 for T1 and 2 to 32 for
E1.
Value
The serial Interface on which you layer the
PPP interface.
Options:
Serial1/1
Serial2/2
Select whether authentication is required
for the PPP interface.
Options:
YES—enables the Server/Client, User
Name, and Password fields.
NO—authentication is not required for
PPP interface.
WAN advanced configuration
Configuration Guide
93
Advertisement
Table of Contents
