Table of Contents
Advertisement
172
VPN advanced configuration
Variable definitions
The following table describes the variables and values for configuring the user database.
Variable
User Name
Password
IP address pool configuration parameters
The following section describes the parameters for the configuration of the IP address pool located
at
Configuration, VPN, Users, Address Pool tab
Prerequisites
•
The address pool cannot be in the same subnet as DHCP addresses.
Variable definitions
The following table describes the variables and values for configuring the VPN address pool.
Variable
Pool Name
Start IP Address
End IP Address
VPN client termination configuration parameters
The following section describes the parameters for the configuration of client termination located
at
Configuration, VPN, Users, Client Termination tab
Variable definitions
The following table describes the variables and values for configuring client termination.
Variable
Policy Action
Policy Name
NN47928-500
NN47928-500
Value
Type the user name.
The range is 1 to 31 characters.
Type the password for the user.
The range is 1 to 31 characters.
.
Value
Type the name of the address pool. Addresses within the pool are
allocated to remote users when they make VPN connection requests.
Type the first IP address of the pool.
Type the last IP address of the pool.
Value
Select this check box to create a policy action.
Type a IPsec policy name.
Each policy must have a unique name.
The range is 1 to 63 characters.
Policy name ALL is not allowed.
.
Advertisement
Table of Contents
