Table of Contents
Advertisement
Port management advanced configuration
This section describes the configuration for Ethernet ports for Business Service Gateway (BSG).
•
The following table describes the variables and values for configuring Ethernet port
control. (page 198)
Prerequisites for port management advanced configuration
•
You must have SYSTEM - READ WRITE permission to access port management
configuration.
Ethernet ports configuration
The following section describes configuration of Ethernet ports.
Ethernet ports configuration navigation
•
Basic port settings configuration parameters (page 197)
•
Port control configuration parameters (page 198)
Basic port settings configuration parameters
The following section describes the parameters for the configuration of basic port settings located
at
Configuration
Variable definitions
The following table describes the variables and values for configuring Ethernet basic port settings.
Variable
Select
Port
Port Status
Link Status
Port Type
,
Port Management, Ethernet, Basic Settings tab
Value
Select the Ethernet port you want to configure.
Displays the Ethernet port number.
Select the administrative status of the Ethernet port.
Select Up to enable the administrative status of the port.
Select Down to disable the administrative status of the port.
Displays the link status of the Ethernet port. One of the following is
displayed:
•
Up – indicates the physical link is connected.
•
Down – indicates the physical link is disconnected.
This field is available only when Port Status is Down.
Select the port type. Select Switch Port or Router Port.
.
Configuration Guide
197
Advertisement
Table of Contents
