Dhcp Host Option Configuration Parameters; Dhcp Host Ip Settings Configuration Parameters - Nortel BSG8ew 1.0 Configuration Manual

Business services gateway
Table of Contents

Advertisement

Variable
Option Code
Value

DHCP host option configuration parameters

The following section describes the parameters for configuration of DHCP host options located at
Configuration, DHCP, DHCP Server, Host Options
Variable definitions
The following table describes the variables and values for configuring a DHCP host option.
Variable
Host MAC Address
Pool Name
Option
Option Code
Value

DHCP host IP settings configuration parameters

The following section describes the parameters for reserving IP addresses for DHCP clients based
on their MAC address, located at Configuration, DHCP, DHCP Server, Host MAC-IP
Reserving IP addresses ensures that DHCP clients always get the same IP addresses.
Value
For the Enter option code manually option, you must enter the code.
For all other options, this field is automatically updated.
Type the option value.
Value
Type the host MAC address.
Select the pool name.
The DHCP option. Select one of the following options:
Netmask (IP Format) – the client subnet mask (RFC 950). The code
for the subnet mask is 1 and its length is 4 octets.
Default Router (IP format) – a list of IP addresses for routers on the
client subnet. The code for the default router option is 3 and its length
is 4 octets. The length must always be a multiple of 4.
Timer servers (IP format) – a list of time servers (RFC 868) available to
the client. The code for the time server option is 4 and its length is 4
octets. The length must always be a multiple of 4.
Name server (IP format) – a list of name servers available to the client.
The code for this option is 4. The length must always be a multiple of 4.
Domain Name server (IP format) – the Domain Name Server IP
address is configured and is sent as an option in DHCP offers.
Domain Name (String) – this domain name is used by the client to
resolve host names through the Domain Name System.
Enter option code manually – the option code must be entered
manually.
For the Enter option code manually option, you must enter the code.
For all other options, this field is automatically updated.
Type the option value.
DHCP advanced configuration
.
tab
Configuration Guide
149
.
tab

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bsg12ew 1.0Bsg12tw 1.0Bsg12aw 1.0

Table of Contents