Dhcp Relay Settings Configuration Parameters - Nortel BSG8ew 1.0 Configuration Manual

DHCP relay settings configuration parameters

The following section describes the parameters for configuration of DHCP relay settings located at
Configuration, DHCP, DHCP Relay.
Variable definitions
The following table describes the variables and values for configuring DHCP relay settings.
Variable
Service DHCP-Relay
IP DHCP Relay Information
Option
DHCP Server Address
Value
Select the Service DHCP-Relay status.
Select Enabled to activate the relay agent.
Select Disabled to deactivate the relay agent.
The default value is Disabled.
Select the IP DHCP Relay Information Option status. This option controls
the processing related to Relaying Agent information.
Select Enabled to start processing the relay agent information options.
The processing includes inserting the options before relaying a packet
from a client to a server and examining or stripping of options before
relaying a packet from a server to a client.
Select Disabled to stop processing relay agent information options.
The default value is Disabled.
Type the IP address of the DHCP server where the relay agent forwards
the packets from the client.
DHCP advanced configuration
Configuration Guide
151