Wlan Radio Configuration Parameters - Nortel BSG8ew 1.0 Configuration Manual

Business services gateway
Table of Contents

Advertisement

Variable
VLAN Identifier
Status

WLAN radio configuration parameters

The following section describes the parameters for configuration of the WLAN radio located at
Configuration,
LAN, Wireless, Radio
Variable definitions
The following table describes the variables and values for configuring the WLAN radio.
Variable
Turbo Mode
Beacon Period (ms)
Auto Channel Selection
Radio Channel
Transmit Power
Maximum Supported Rate
Value
Type the VLAN ID to which SSID users belong. Access points use this
VLAN ID to tag the packets from the specified users of the given SSID.
When you configure an SSID, this field appears in the new row. It specifies
the activation status of the WLAN SSID. The configured SSID is added
with a default status of Enabled.
When Enabled, the radio starts sending beacons for the SSID and allows
clients to connect to it.
Select Disabled to deactivate the radio. The radio stops sending the
beacons for the SSID.
tab.
Value
Specifies the Turbo Mode status. Turbo Mode is used to perform a speed
boost to the wireless network.
Select Dynamic to allow the BSG to detect whether clients are capable of
Turbo Mode. If a client is not capable of turbo mode, the client returns to
normal mode.
Select Static only when you know that all wireless devices in the network
are capable of Turbo Mode.
Select Disabled if there are no wireless clients to support turbo mode.
The default value is Dynamic.
Type the beacon period.
The value ranges from 20 to 1000 ms. The default value is 100 ms.
Select this check box to enable automatic channel selection.
The default is Enabled.
Select the radio channel, if Auto Channel Selection is not enabled.
Specifies the transmission power. Select one of the following options:
Full (100%)
Half (50%)
Quarter (25%)
Eigth (12.5%)
Minimum
The default value is Minimum.
Select the link speed of the Radio. Select the maximum supported rate.
Options are 1, 2, 5.5, 9, 11, 12, 18, 24, 36, 48, and 54.
The default value is 54 Mbps.
LAN advanced configuration
Configuration Guide
103

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bsg12ew 1.0Bsg12tw 1.0Bsg12aw 1.0

Table of Contents