Table of Contents
Advertisement
Procedure steps
Step
Action
1
From the BSG navigation pane, select Configuration, SIP, System
Configuration.
The Central SIP Server Configuration pane appears.
2
In the Managed Domain Name field, type the domain name of your voice
service provider.
3
In the Central SIP Server Address field, type the central SIP server IP address.
4
From the Transport list, select the transport protocol to use for the port.
5
In the Port field, type the port number to use for the transport protocol.
6
In the Poll Interval field, type the number of seconds for the interval time.
7
In the Poll Retries field, type the number of times the server tries to connect.
8
Click Apply.
Variable definitions
The following table describes the variables and values for configuring SIP system settings.
Variable
Managed Domain Name
Central SIP Server Address
Transport
Port
Poll Interval
Poll Retries
End
Value
Type the domain name of the SIP server.
You can also type the IP address of the SIP server in this field.
The default name is mydomain.com.
Type the IP address of the central SIP server.
This field is mandatory.
Select the required transport protocol for SIP. Select one of the following
options:
•
User Datagram Protocol (UDP) - the transport protocol is UDP.
•
Transmission Control Protocol (TCP) - the transport protocol is TCP.
•
Transport Layer Security (TLS) - the transport protocol is TLS.
The default value is UDP.
Type the port number for the transport protocol.
The value ranges from 1 to 65535.
The default value is 5060. This default value appears only after the Central
SIP Server is configured.
Type the SIP poll interval value in seconds.
The value ranges from 10 to 600 seconds. The default value is 30
seconds.
Type the poll retry value.
The value ranges from 1 to 10.
The default value is 2.
SIP configuration
49
Configuration Guide
Advertisement
Table of Contents
