Table of Contents
Advertisement
Variable definitions
The following table describes the variables and values for configuring SIP CDR settings.
Variable
CDR Generation
TFTP server address
Directory Path
SIP diagnostics (detailed traces) configuration parameters
The following section describes the parameters for the configuration of diagnostics located at
Configuration
,
SIP, System Configuration, Diagnostics tab
Variable definitions
The following table describes the variables and values for configuring SIP diagnostics.
Variable
Dump SIP Messages
Detailed Traces
Brief Traces
Value
Select the CDR generation status.
Select Enable to enable logging of CDR information in the CDR directory.
Select Disable to disable logging of CDR information in the CDR directory.
The default value is Disable.
Type the TFTP server address.
Type the directory path.
Value
Specifies whether SIP messages are traced.
Select Enable to enable traces for all calls.
Select Disable to disable traces for all calls.
The default value is Disable.
Specifies that the traces are logged in detail. Select one of the following
options:
•
All – all components are traced.
•
None – no components are traced.
•
Selected – only selected components are traced. If you select this
option, you can select any of the components: Call Server, Registrar,
ALG-CAC, Routing Engine, and Carrier Monitoring.
The default value is All.
Specifies that the traces are logged in brief. Select one of the following
options:
•
All – all components are traced.
•
None – no components are traced.
•
Selected – only selected components are traced. If you select this
option, you can select any of the components: Call Server, Registrar,
ALG-CAC, Routing Engine, and Carrier Monitoring.
The default value is All.
SIP advanced configuration
.
Configuration Guide
181
Advertisement
Table of Contents
