Table of Contents
Advertisement
The following section describes the parameters for configuration of MSTP VLAN mapping
located at Configuration,
Variable definitions
The following table describes the variables and values for configuring the VLAN mapping for
MSTP.
Variable
MSTP Instance ID
Add VLAN
Delete VLAN
MSTP port settings configuration parameters
The following section describes the parameters for configuration of the MSTP port settings located
at Configuration,
Variable definitions
The following table describes the variables and values to configure the MSTP port settings.
Variable
Select
Port
Port Name
MSTP Instance ID
MSTP Status
Priority
Cost
Spanning Tree, MSTP, VLAN Mapping tab
Value
Type the MSTP Instance ID. The Common Instance Spanning Tree
(CIST) is generated by default and has instance ID number 0.
The allowable values range from 1 to 16.
Select the VLAN to map to the MSTP instance.
Select the VLAN to unmap from the MSTP instance.
Spanning Tree, MSTP, Port Settings tab
Value
Select a row.
Displays the port number.
Displays the port name.
Displays the instance ID of the STP that the port is associated with.
Specifies the current state of the port.
Select Enabled to enable the MSTP on the current port.
Select Disabled to disable the MSTP on the current port.
Type the priority of the port.
The value ranges from 0 to 240.
The default value is 128.
Type the cost associated with the port. This value is added to the cost of
any path that includes this port.
The value ranges from 1 to 200000000.
The default value is 200000.
VLAN advanced configuration
.
.
Configuration Guide
121
Advertisement
Table of Contents
