Nortel BSG8ew 1.0 Configuration Manual page 78

78 QoS configuration
Procedure steps
Step
1
2
3
4
5
6
7
8
9
Variable definitions
The following table describes the variables and values for configuring QoS queue settings.
Variable
Port No
Select
Queue
Green Threshold Min
Green Threshold Max
Amber Threshold Min
Amber Threshold Max
NN47928-500 NN47928-500
Action
From the BSG navigation pane, select Configuration, QoS, Queue Settings
tab.
The Queue Configurations pane appears.
From the Port No list, select the port for which you want to configure QoS queue
settings.
In the Select field, select the queue that you want to configure.
In the Green Threshold Min field, type the minimum green threshold value.
In the Green Threshold Max field, type the maximum green threshold value.
In the Amber Threshold Min field, type the minimum amber threshold value.
In the Amber Threshold Max field, type the maximum amber threshold value.
In the Scheduler Weight field, type the queue weight.
Click Apply.
Value
The port number for which the queue settings apply.
Select the queue you want to configure.
Displays the queue number.
Type the minimum Green Threshold value.
Green packets start to drop at the configured minimum depth.
The default value is 100.
Type the maximum Green Threshold value.
All green packets are dropped at the configured maximum depth.
The default value is 200.
Type the minimum Amber Threshold value.
Amber packets start to drop at the configured minimum depth.
The default value is 50.
Type the maximum Amber Threshold value.
All amber packets are dropped at the configured maximum depth.
The default value is 64.
End