SIP configuration
This section describes the procedures to configure SIP for the Business Services Gateway (BSG)
system.
Note: You should configure the emergency number (for example, 911) before
you use the SIP server. This ensures that an emergency call originating on your
system reaches its destination if the SIP server becomes unavailable. To configure
the emergency number, see
Prerequisites to SIP configuration
•
You must have VOICE - READ WRITE permission.
•
The Internal SIP Server must be enabled. See
(page
179).
SIP configuration procedures
The following task flow shows the sequence of procedures to perform to configure SIP.
Configuring FXO (page
Central SIP server configuration parameters
52).
Configuration Guide
47