Renewing Or Releasing The Lan Lease - Nortel BSG8ew 1.0 Configuration Manual

98 LAN advanced configuration
Variable definitions
The following table describes the variables and values for configuring virtual interface.
Variable
VLAN ID
IP Address Assignment
IP Address
Subnet Mask
MTU

Renewing or releasing the LAN lease

Complete this procedure to renew or release the lease.
Prerequisites
• You can renew or release the LAN lease only if the IP Address Assignment is Dynamic.
Procedure steps
Step
1
2
3
4
NN47928-500 NN47928-500
Value
Type the VLAN identifier.
Select the IP address assignment mode.
Select Manual to manually assign the IP address.
Select Dynamic for the System to assign the IP address for the specified
VLAN from Dynamic Host Configuration Protocol server configured in
BSG.
Type the IP address, if the IP address assignment is Manual.
Type the subnet mask for the LAN, if the IP address assignment is
Manual.
Type the Maximum Transmission Unit value.
The range is 90 to 9902. The default value is 1500.
If using Fast Ethernet, the MTU frame size must not be larger than 1522.
Action
From the BSG navigation pane, select Configuration, LAN, Virtual Interfaces.
The IP Address Configuration panel appears.
In the Select field, select the IP address that you want to modify.
Select the Renew option button to renew the lease.
OR
Select the Release option button to release the lease.
Click Apply.
End