Table of Contents
Advertisement
QoS configuration
This section describes the procedures to configure Quality of Service (QoS) for the Business
Services Gateway (BSG) system.
QoS provides different types and levels of service for network traffic. With QoS you can assign
different priorities for different types of traffic and guarantee a certain level of performance.
Prerequisites for QoS configuration
•
You must have SYSTEM - READ WRITE permission to configure QoS.
•
QoS Status must be enabled (it is enabled by default).
•
You must know the uplink rate limit. This is provided by your ISP. The total bandwidth
you assign to all flows must be less than or equal to the uplink rate.
•
You must calculate how much bandwidth to give to the various flows (for example, voice,
data, and video).
QoS configuration procedures
The following task flow shows the sequence of procedures to perform to configure QoS.
71
Configuration Guide
Advertisement
Table of Contents
