Table of Contents
Advertisement
Static routes configuration parameters
The following section describes the parameters for configuration of static routes located at
Configuration,
Variable definitions
The following table describes the variables and values for adding static routes.
Variable
Destination Network
Subnet Mask
Gateway
Interface
Distance (Metric)
Routing Protocol
IP Routing, Static Routes
Value
Type the network address of the route.
Type the subnet mask for the Destination Network address.
Type the Next Hop gateway to reach the IP address.
Select the outgoing interface.
The value ranges from 1 to 4094.
Type the metric value of the destination.
The value ranges from 0 to 255.
Displays the routing protocol for the given destination network and subnet
mask.
This field is displayed after you add a static route.
IP routing advanced configuration
.
129
Configuration Guide
Advertisement
Table of Contents
