Table of Contents
Advertisement
Variable definitions
This table describes the variables that appear on the T1/E1 Channel Group Configuration page.
Variable
Channel Group
Channel Group Index
Interface
Time Slot
Configuring the PPP interface
Complete this procedure to configure the PPP interface.
Procedure steps
Step
Action
1
From the BSG navigation pane, select Configuration, WAN, T1/E1, PPP
Configuration.
The PPP Configuration pane appears.
2
From the Serial Interface list, select Serial1/1.
3
From the Authentication Required list, select YES or NO.
Your service provider will notify you if authentication is required.
4
From the Server/Client list, select Server or Client.
This is available only if authentication is required.
5
In the User Name field, type the user name.
If you selected Client, type the BSG user name.
If you selected Server, type the peer user name.
6
In the Password field, type the password.
If you selected Client, type the BSG password.
If you selected Server, type the peer password.
7
From the Link Type list, select Public.
8
Click Apply.
Value
This identifies an instance of channel
grouping on a T1 or E1 interface. The
format is Serialx/y where x is either 1 for
port 1 or 2 for port 2 and y is the Channel
Group Index.
The Channel Group Index. This identifies
a grouping of channels on the T1
interface.
The range is 1to 64.
This identifies which of the two T1/E1
interfaces on the BSG. Possible values
are t1e1-1 or t1e1-2.
The time slots.
The range is 1to 24 for T1 and 2 to 32 for
E1.
WAN configuration
33
Configuration Guide
Advertisement
Table of Contents
