Mac Filter Enable Command; Mac Filter Disable Command; Mac Filter Delete Command - ZyXEL Communications ZyXEL DMA 1000 User Manual

9.4.2

MAC filter Enable Command

Syntax:
192.168.1.1 bridge> macfilter enable [<port>]
where
<port>
This command enables the MAC filtering feature on a specific port or on all ports if no port is specified.
9.4.3

MAC filter Disable Command

Syntax:
192.168.1.1 bridge> macfilter disable [<port>]
where
<port>
This command disables the MAC filtering feature on a specific port or on all ports if no port is specified.
9.4.4 MAC filter Add Command
Syntax:
192.168.1.1 bridge> macfilter add <port> <mac>
where
<port>
<mac>
This command adds a source MAC address fixed on a specified port. You may add up to five MAC addresses.
9.4.5

MAC filter Delete Command

Syntax:
192.168.1.1 bridge> macfilter delete <port> <mac>
where
<port>
<mac>
This command removes a configured source MAC address from a port specified by you.
Bridge Commands
= A bridge port number.
= A bridge port number.
= A bridge port number.
= The source MAC address in "00:a0:c5:12:34:56" format.
= A bridge port number.
= The source MAC address in "00:a0:c5:12:34:56" format.
IES-1000 User's Guide
9-3