57.1.2 ACL Profile Delete Command
Syntax:
ras> switch acl profile delete <name>
where
<name>
This command removes the specified ACL profile.
You cannot remove the ACL profile(s) that is currently in use.
57.1.3 ACL Profile Show Map Command
Syntax:
ras> switch acl profile showmap <name>
where
<name>
This command displays the DSL port(s) to which the specified ACL profile is applied.
The following example displays the port mapping table for the example ACL profile.
Figure 296 ACL Profile Show Map Command Example
ras> switch acl profile showmap test
profile: test
port type
---- ------ --- -----
57.1.4 ACL Profile Show Command
Syntax:
ras> switch acl profile show [<profile>]
where
[<profile>]
This command lists the names of every ACL profile or displays the detailed settings of the
specified ACL profile.
IES-1248-71/73 User's Guide
The name of the ACL profile.
=
The name of the ACL profile.
=
vpi
vci
The name of the ACL profile.
=
Chapter 57 ACL Commands
421