Avaya 580 User Manual page 91

Table 2-6. Configuration File Management Web Page Parameters
Parameter
Copy Destination
Destination Filename
TFTP Server IP Address
Document No. 10-300077, Issue 2
Description
Specifies the location of the
destination
Specifies the path and name of
the destination file
Specifies the IP address of a
source or destination TFTP
server
File — To copy a file stored on the switch to your running or
—
startup configuration, to a location on the switch, or to a location
on a TFTP server.
TFTP Server — To copy a file stored on a TFTP server to your
—
running or startup configuration or to a file on the switch.
*Note: If you select File or TFTP Server, you must also provide
the path and filename of the source file in the Destination
Filename field.
3. Select one of the following from the Copy Destination
pull-down menu.
Running-Config — Copies your startup configuration, or other
—
file located on the switch or on a TFTP server, to your running
configuration.
Startup-Config — Copies your running configuration, or other
—
file located on the switch or on a TFTP server, to your startup
configuration.
File — Copies your startup or running configuration, another
—
file located on the switch, or a file located on a TFTP server to a
file on the switch.
Options
• Unspecified- Specifies an initialized value.
• File - Specifies that a source is copied or
downloaded to NVRAM.
• Running-Config - Specifies that a source is
copied to the running configuration.
• Startup-Config - Specifies that a source is
copied to the startup configuration.
• TFTP Server - Specifies that a source is
copied to a TFTP server location.
Configuration files and other files can be copied
to NVRAM on the switch or to a TFTP server as
a destination location.
Copy (download) source files, located on a
TFTP server, to your running configuration,
your startup configuration, or a location on the
switch. Or, copy (upload) your configuration
files, or a file located on the switch, to a TFTP
server.
Setting Up the Switch
2 of 2
2-43