Table of Contents
Advertisement
Chapter 15
15-6
Figure 15-3. ADD OSPF Area Web Page
3. See
Table 15-2
to configure the Add OSPF Area Web page parameters.
4. Click CREATE to save your changes, or CANCEL to restore previous
settings.
Table 15-2. Add OSPF Area Web Page Parameters
Parameter
Allows you to...
Area ID
Specify the Area ID (32-bit character) for the new area. This
must be a unique ID within AS.
Note:
Area Type
Select the type of area. Types include:
• Non-Stub - Non-edge device/router.
• Stub - An edge device/router that does not leak external
• Not-so-stubby - This is still a stub area, however, this
Translate 7 into
Enable or Disable the translation of the NSSA ASE Type 7
5
into an AS External LSA Type 5.
Stub Metric
Specify the stub area default summary cost metric. (Default
is 1).
Type 3 ASE
Select to enable or disable the Type 3 summary LSA filter for
Filter
Stub and NSSA only.
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Do not use 0.0.0.0 as an area ID.
advertisements.
device/router can leak some external advertisements.
Advertisement
Table of Contents
