Table of Contents
Advertisement
Displaying the IPX Service Table
Document No. 10-300077, Issue 2
Table 16-10. IPX Service Table Search Parameters
Parameter
Allows you to...
Service Name
Search the IPX Service Table using a service name you
specify. Note that you can specify a single asterisk (*) to
indicate a wildcard character that will match all characters
entered before the wildcard. For example, entering FS_ENG*
will find all service names that start with FS_ENG.
Service Type
Search the IPX Service Table using the service type you
specify. For example, to specify a print queue type, you
would enter 3 (0003h) in the space provided.
4. Click on the SEARCH to start the search.
If available services are found they are displayed in IPX Service
—
Table Web page.
If services are not available, a message displays in the IPX
—
Service Table Web page.
To display the IPX service table:
1. Perform an IPX Service table search as described in
Service
Table" earlier in this chapter. If available services are found
they are displayed in the IPX Service Table Web page.
2. See
Table 16-11
to review each field in the IPX Services table:
Table 16-11. IPX Service Table Parameters
Parameter
Defines the...
Select
Parameter selected.
Name
Name of the service in question. For example, FS_ENG01.
(Use SLIST (NetWare 3.x™) or NLIST (NetWare 4.x™) to
list your current server names and types from your NetWare
server.)
Configuring IPX Routing
2 of 2
"Searching the IPX
1 of 2
16-23
Advertisement
Table of Contents
