Chapter 15
Modifying OSPF Summaries
Web Agent
Procedure
CLI Command
Monitoring Switch Performance Using OSPF
Statistics
15-18
You can modify an OSPF summary using wither the Web Agent or the CLI.
To modify an OSPF summary using the Web Agent:
1. In the navigation pane, expand the Routing > IP > OSPF folders, and
then click Summaries.
The OSPF Summaries Web page is displayed in the content pane. See
Figure
15-7.
2. Select the OSPF summary to be modified.
3. See
Table 15-5
to configure the OSPF Summaries Web page parameters.
4. Click APPLY to save your changes, or CANCEL to restore previous
settings.
To modify an OSPF summary, use the following command:
(configure router:ospf)# area <area-id> range <ip-address>
<mask>
You can monitor switch performance using the following OSPF statistics:
OSPF Links
OSPF Neighbors
OSPF Link Database
This section contains the following procedures:
Displaying OSPF Statistics
Displaying OSPF Links
Displaying OSPF Neighbors
Searching the OSPF Link State Database
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1