Table of Contents
Advertisement
Chapter 12
Routing Function
12-2
Configuring VRRP
Configuring IRDP
Configuring LDAP
Configuring a Static Route for the PPP Console
Configuring the IP Interface for the PPP Console
For more information about the CLI commands that are mentioned in this
chapter, see Command Reference Guide for the Avaya P580 and P882
Multiservice Switches, Software Version 6.1.
The Routing function is logically independent from and sits "on top" of the
Layer 2 VLANs. The function of the Inter-VLAN router is to route traffic
between VLANs (subnets). The router has an "interface", or "virtual port",
for each VLAN that it is routing traffic.
This interface is configured similarly to a physical interface, but is not
associated with any particular physical
For more detailed information on the switch routing operations, see
"Routing with Layer 2 and Layer 3
Figure 12-1. Intra and Inter VLAN Bridging and Routing
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
interface.(Figure
12-1)
Modules", in
Chapter
1, "Introduction."
Advertisement
Table of Contents
