Disabling Or Reenabling Snmp; Viewing The Snmp Status - Avaya 580 User Manual

Disabling or Reenabling SNMP

Disabling SNMP
Reenabling SNMP

Viewing the SNMP Status

Document No. 10-300077, Issue 2
To disable SNMP, use the following CLI command:
(configure)# no snmp-server
This command overrides secure mode, which disables SNMPv1 and v2 and
enables SNMPv3. For information on secure mode, see
To reenable SNMP, use the following CLI command:
(configure)# snmp-server enable
This command enables the three versions of SNMP: SNMPv1, v2, and v3.
To view the status of SNMP, use the following CLI command:
(configure)# show snmp
This command displays the status of SNMP (enabled or disabled) and the
administrative contact and physical location of the switch, if set.
Configuring SNMP
"Secure Mode."
5-23