Configuring Switch Ports - Avaya 580 User Manual

Configuring Switch Ports

CAUTION:
Web Agent
Procedure
Document No. 10-300077, Issue 2
You can configure how each switch port performs its switching functions
(for example, VLAN parameters, hunt group assignments, trunk mode, and
frame tag scheme) through the switch port parameters.
You can configure switch port parameters using either the Web Agent or the
CLI.
Before changing the VLAN that a port is assigned to, you must
remove the port from the hunt group that the port is assigned to. Do
not attempt to change the VLAN and remove the port from the hunt
group simultaneously. If you attempt to change the VLAN that the
port is assigned to and remove the port from the hunt group
simultaneously, the switch assigns all ports in the hunt group to the
new VLAN.
To configure switch port parameters using the Web Agent:
1. In the navigation pane, expand the Modules & Ports folder, and then
click Configuration. The Module Information Web page is displayed in
the content pane. See
2. In the Switch Ports column, select the switch ports for a module. The
Switch Ports Web page is displayed.
3. In the Name column, select a port name. The Switch Port Configuration
Web page is displayed. See
Figure 8-2.
Figure 8-9.
Configuring Ports
8-29