Creating Or Modifying A Community String For The Atm-Uplink Module - Avaya 580 User Manual

Creating or Modifying a Community String for the ATM-
Uplink Module
Document No. 10-300077, Issue 2
Table 5-8 defines the command keywords and variables.
Table 5-8. snmp-server community
Field Definition
<community- The name of the community string. The community
string> string can range from 1 to 26 characters.
Important: Do not assign a community string and
<groupname> Name of the group to which you are assigning the
community string.
Important: Do not assign the community string to a
<ip-addr> The IP address from which the community string is
valid. Trap messages are sent to this IP address if you
enter the notify option.
[notify] Sends trap messages to the IP address that you specify.
To create or modify a community string to access the ATM-Uplink module,
use the following CLI command:
(configure)# snmp-server atm-community <community-string>
<slot> {ro | rw} [<ip-addr>]
Table 5-9 defines the command keywords and variables.
Table 5-9. snmp-server community
Field Definition
<community- The name of the community string. The community
string> string can range from 1 to 26 characters.
Important: Do not assign a community string and
<slot> The slot number of the ATM Uplink module.
SNMPv3 user the same name.
group that requires authentication or
encryption. Community strings do not
support authentication or encryption.
SNMPv3 user the same name.
Configuring SNMP
1 of 2
5-19