Table of Contents
Advertisement
Document No. 10-300077, Issue 2
3. Configure an IPX SAP name filter. See
the Add IPX SAP Name Filter Web page parameters
4. Click APPLY to save your changes, or CANCEL to restore previous
settings.
Table 18-2. IPX SAP Name Filter Web Page Parameters
Parameter
Allows you to...
Interface
Select the interface to which this filter will be applied to
SAP packets sent and/or received on the interface from
the pull-down menu.
Precedence
Enter the filter precedence (in order of importance) with
0 equal to most important.
Note:
Name
Enter a service name. For example, FS_ENG001. A
single asterisk may be present as the last character,
which will match all remaining characters of a service
name.
Type
Enter the service type that identifies the type of service
the server provides.
Well-known service types include:
A value of ffff matches all service type values.
Direction
Select the filter direction from the following
pull-down menu options:
Configuring the IPX SAP Protocol
Table 18-2
All SAP filters on the same interface must be
assigned a unique precedence value.
• Unknown (0)
• Print Queue (3)
• File Server (4)
• Job Server (5)
• Print Server (7)
• Archive Server (9)
• Remote Bridge Server (24)
• Advertising Print Server (47)
• NetWare Directory Services [NDS] (278)
• Inbound - Applies the filter only to SAP packets
received on the interface.
• Outbound - Applies the filter only to SAP packets
sent on the interface (Default)
• Both - Applies the filter to SAP packets both sent
and received on the interface.
for an explanation of
1 of 2
18-5
Advertisement
Table of Contents
