Document No. 10-300077, Issue 2
Figure 12-20. IP Route Table Search Web Page
2. Select the search criteria you want to use to find more specific
information on available routes. For example, if you want to find all
static routes that are presently configured on your switch, search by
source and specify static as your search value.
3. See
Table 12-12
to determine your search parameters:
Table 12-12. IP Route Table Search Parameters
Parameter
Source
Interface
IP Address
4. Select SEARCH. If routes are available, they are displayed in the IP
Routing Table Web page. See
Allows you to search...
Your IP routing table using one of the following
parameters:
• RIP
• OSPF
• Static
• Local
Once you select one of these parameters, the search
attempts to find routes associated with that parameter.
The interface you selected. System default entries
include:
• Default
• Discard
• Ethernet Console
• Configured Interface
The IP address you entered.
Figure
12-21.
Configuring IP Routing
12-47