Creating A Static Multicast Session - Avaya 580 User Manual

CLI Command

Creating a Static Multicast Session

Web Agent
Procedure
Document No. 10-300077, Issue 2
Table 20-5. Multicast Session Client Port Web Page Parameters
Parameter Definition
Select Select the multicast session client port.
Port Displays the client port number.
Application Displays the application(s) associated with this client port. The
applications are:
• Mgmt
• IGMP
• LGMP
• CGMP
To delete a multicast session client port using the CLI, enter the following
command from Configure mode:
(configure)# clear intelligent-multicast client-port <session-id>
port <mod-port-spec>
You can create a static multicast session using either the Web Agent or the
CLI.
To create a new static multicast session using the Web Agent:
1. In the navigation pane, expand the L2 Switching > Intelligent
Multicast folders, and then click Static Sessions.
The Static Multicast Sessions Web page is displayed in the content
pane. See Figure 20-7.
*Note: You must enable intelligent multicasting on a global basis
to make your static multicast session active. See
"Configuring Global Intelligent
this chapter.
Managing Intelligent Multicasting
Multicasting" earlier in
20-15