Table of Contents
Advertisement
8
Overview
Two Categories of Port Settings
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Configuring Ports
The following information and procedures are provided in this chapter and
are common to both layer 2 and layer 3 module configuration:
Two Categories of Port Settings
Configuring Physical Port Settings
Configuring Switch Ports Settings
Configuring Port Redundancy
GBIC Identification
Network Error Detection and Recovery
Internal Error Detection and Recovery
For more information about the CLI commands that are mentioned in this
chapter, see Command Reference Guide for the Avaya P580 and P882
Multiservice Switches, Software Version 6.1.
The system has two categories of port settings:
Physical port settings — Allows you to set up rules that guide the
system's physical layer interaction (for example, enable/disable,
speed, auto-negotiation).
Switch port settings — Allows you to specify how the port
participates in switching (for example, VLAN mode, trunking).
The following sections explain some of the Avaya P580 and P882
Multiservice switch features and how to configure the ports:
Physical Port Features
Switch Port Features
Relationship Between Different Switch Port Parameters
Assigning VLANs to a Port and Associated Issues
8-1
Advertisement
Table of Contents
