Table of Contents
Advertisement
Chapter 2
CLI Command
Deleting a Custom Access Type
Web Agent
Procedure
2-16
To modify a custom access type, use the following CLI command:
(configure)# set custom-access-type <catName> [sys-configuration
{ro | rw | none}] [module-port-mgmt {ro | rw | none}] [events-mgmt {ro |
rw | none}] [l2-switching {ro | rw | none}] [routing {ro | rw | none}]
* Note: Unlike the custom-access-type command that you use to create
a custom access type, you must specify read-only, read-write,
or no permission when you use the set custom-access-type
command to modify a custom access type.
To delete a custom access type:
1. In the navigation pane, expand the System > Administration folders,
and then click Custom Access Types.
The Custom Access Types Web page is displayed in the content pane.
See
Figure
2-5.
2. In the Type Name field, select the access type that you want to delete.
3. Click Delete.
The Delete Custom Access Type Web page is displayed in the content
pane. See
Figure
2-8.
Figure 2-8. Delete Custom Access Type Web Page
4. Click Yes to delete the custom access type that is displayed, or click No
to keep the access type.
*Note: User accounts that are assigned this custom access type
will no longer be able to log into the switch.
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Advertisement
Table of Contents
