Table of Contents
Advertisement
Web Agent
Procedure
Document No. 10-300077, Issue 2
To display the IGMP Interface Statistics using the Web Agent:
1. In the navigation pane, expand the Routing > IGMP folders, and then
click Interface Statistics.
The IGMP Interface Statistics Web page is displayed in the content
pane. See
Figure
12-25.
Figure 12-25. IGMP Interface Statistics Web Page
2. To modify the interface statistics, perform one of the following:
Select one or more interfaces, and then click CLEAR to reset
—
statistics on those interfaces to zero.
Click CLEAR ALL to reset all statistics to zero.
—
Click REFRESH to view the latest interface statistics.
—
3. See
Table 12-16
for an explanation of the IGMP Interface Statistics Web
page parameters:
Table 12-16. IGMP Interface Statistics Web Page Parameters
Parameter
IGMP Interface
IP Address
IP Address Mask
State
IGMP Version
Defines the...
IP interface for these statistics.
IP address associated with the interface.
Subnet mask associated with each listed interface.
Current state of the interface. For example, if the
interface is enabled and operating properly, UP is
displayed.
Version of IGMP enabled on each interface.The default
version is V2
Configuring IP Routing
1 of 2
12-53
Advertisement
Table of Contents
