Table of Contents
Advertisement
Displaying the DVMRP Downstream Dependent Routers
Web Agent
Procedure
Displaying the DVMRP Multicast Forwarding Cache
Document No. 10-300077, Issue 2
To view the DVMRP downstream dependent routers:
1. In the navigation pane, expand the Routing > DVMRP folders, and then
click Route Table.
The DVMRP Route Table Web page is displayed in the content pane.
See
Figure
12-32.
2. Select the number from the Downstream Dependent Router(s) column
for the appropriate source network. The Downstream Dependent
Router(s) Web page is displayed.
3. See
Table 12-26
for an explanation of the DVMRP Downstream
Dependent Router(s) Web page parameters.
Table 12-26. DVMRP Downstream Dependent Router(s) Web Page
Parameters
Parameter
Router Network Address
Found on Interface
DVMRP Supported Major/
Minor Version
Router Received Probe
from This Router
Router Supports Prune
Function
Router Supports
Generation ID Function
Router is SNMP
Manageable
The DVMRP Multicast Forwarding Cache Web page provides detailed
information on the multicast forwarding attributes including information on
downstream interfaces and upstream sources. DVMRP allows the switch to
construct paths from the hosts that are sending to a multicast group to the
hosts that are receiving it.
Definition
Displays the router network address of the
downstream dependent router.
Displays the name of the interface on which the
downstream router was found.
Displays the DVMRP version supported.
Displays whether the router received a probe
from this router.
Displays whether this router supports prune
functionality.
Displays whether the router supports generation
ID function.
Displays whether the router can be managed by
SNMP.
Configuring IP Routing
12-67
Advertisement
Table of Contents
