CLI Command
Viewing the Server Certificate
Web Agent
Procedure
Document No. 10-300077, Issue 2
5. Click Create Self-Signed Certificate.
6. Restart SSL for the new certificate to take effect. For information on how
to restart SSL, see
"Restarting
To create a self-signed certificate, use the following commands:
To create a CSR, (configure)# ssl certreq [{512 | 1024}]
To self-sign the CSR, (configure)# ssl selfcert
To view the SSL server certificate:
1. In the navigation pane, expand the System > Administration > Security
> SSL folders.
2. Click Certificates. The SSL Server Certificate Web page is displayed in
the content pane. See
SSL/HTTPS" later in this chapter.
Figure
4-6.
Security
4-15