Avaya 580 User Manual page 466

Chapter 15
15-4
2. See Table 15-1 to configure the OSPF Global Configuration Web page
parameters.
3. Click APPLY to save changes, or CANCEL to restore previous settings.
Table 15-1. OSPF Global Configuration Web Page Parameters
Parameter Explanation
OSPF Select to enable or disable OSPF globally on your switch.
Router ID Specify the Router ID on the switch. The router ID is a 32-
bit number assigned to each router running OSPF. This
number uniquely identifies the router within an
Autonomous System. If 0.0.0.0 is used, the router uses the
IP address of an interface.
AS Border Displays the Autonomous System Border Router (ASBR)
Router status. The switch automatically detects the ASBR status:
For more information on route redistribution filters, see
"Configuring Route
"Configuring IP
SPF Hold Time Specify the minimum number of seconds between SPF
(shortest path first) runs.
SPF Suspend Specify the number of nodes to process SPF runs before
suspending.
Auto-Creation of Enable or disable the function of automating the creation of
Virtual Links virtual circuits based on network topology. This feature is
Avaya proprietary and only auto creates virtual links on the
config. notes.
Maximum Configure the maximum number of paths used when
Number of Paths running OSPF.
Local Ext Type Specify whether imported local routes are advertised in
OSPF with type 1 (internal) or type 2 (external) metrics.
RIP Ext Type Specify whether imported RIP routes are advertised in
OSPF with type 1 (internal) or type 2 (external) metrics.
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
• If route redistribution filters are configured for OSPF,
the ASBR status is Enable.
• If all interfaces on the switch are in an OSPF stub area,
the ASBR status is Disable, regardless of whether
route redistribution filters are configured.
Redistribution" in
Routing."
Chapter 12,
1 of 2