Configuring the OSPF Global Configuration
Web Agent
Procedure
Document No. 10-300077, Issue 2
The OSPF global configuration allows you to globally configure OSPF on
your switch. It also allows you to specify your router ID and whether or not
you want the switch to be the Autonomous System (AS) border router.
You can globally configure OSPF using either the Web Agent or the CLI.
To globally configure OSPF using the Web Agent:
1. In the navigation pane, expand the System > IP > OSPF folders, and
then click Global Configuration.
The OSPF Global Configuration Web page is displayed in the content
pane. See
Figure
15-1.
Figure 15-1. OSPF Global Configuration Web Page
Configuring the OSPF Routing Protocol
15-3