Adding Or Deleting Interfaces To A Zone Filter - Avaya 580 User Manual

CLI Command

Adding or Deleting Interfaces to a Zone Filter

Web Agent
Procedure
Document No. 10-300077, Issue 2
CANCEL to restore previous settings.
—
Edit If to add or delete this zone filter to/from an interface. The
—
Add/Delete Interface to Zone Filter Web page is displayed. See
"Adding or Deleting Interfaces to a Zone
chapter for more information.
To edit an AppleTalk zone filter using the CLI, use the following command:
(configure)# appletalk access-list <access-list-number> {permit |
deny} zone <string>
You can add or delete interfaces to a zone filter using either the Web Agent
or the CLI.
To add or delete interfaces to a zone filter using the Web Agent:
1. In the navigation pane, expand the Routing > AppleTalk >
Configuration folders, and then click Zone Filter.
The AppleTalk Zone Filter Web page is displayed in the content pane.
See Figure 19-16.
2. Select Edit If. The Add/Delete Interface to Zone Filter Web page is
displayed. See Figure
Figure 19-18. Add/Delete Interface to Zone Filter Web Page
3. Select the interface to be added from the Add field pull-down menu.
Or
Click the checkbox in the Select column for the interface that you want
to be remove.
Configuring AppleTalk Routing
19-18.
Filter" later in this
19-21