Table of Contents
Advertisement
19
Overview
Implementation
What is AppleTalk Routing?
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Configuring AppleTalk
Routing
The following information and procedures provided in this chapter pertain
to layer 3 module configuration only:
Implementation
Configuring AppleTalk Routing
Viewing AppleTalk Statistics
For more information about the CLI commands that are mentioned in this
chapter, see Command Reference Guide for the Avaya P580 and P882
Multiservice Switches, Software Version 6.1
This section introduces AppleTalk routing, explains how it operates, and
explains why you would want to configure it on the Avaya P580 or P882
Multiservice switch.
AppleTalk Phase I was originally designed for local work groups.
AppleTalk Phase II extends the number of nodes in an internetwork to over
16 million and the number of zones per port to 254. The Avaya switch
supports both AppleTalk Phase I and Phase II. However, the translation
from AppleTalk Phase I to Phase II is not supported.
* Note: The Avaya P580 and P882 Multiservice switches support
AppleTalk over Ethernet only.
The supported Ethernet versions are:
Ethernet SNAP
Ethernet II
19-1
Advertisement
Table of Contents
