Table of Contents
Advertisement
Chapter 5
RFC Standards
5-2
Creating an SNMPv3 Administrator
Configuring Views
Configuring Groups
Configuring an SNMPv3 User
Changing a User Password
Configuring SNMPv1 or v2 Community Strings
Setting the Administrative Contact
Setting the Physical Location of the Switch
Disabling or Reenabling SNMP
Viewing the SNMP Status
*Important: You must have administrator access to the switch to
use the CLI commands that are discussed in this
chapter.
For more information on SNMPv3, see:
RFC 2576, "Coexistence between Version 1, Version 2, and Version
3 of the Internet-Standard Network Management Framework."
RFC 3411, STD 62, "An Architecture for Describing SNMP
Management Frameworks."
RFC3412, STD 62 "Message Processing and Dispatching for the
Simple Network Management Protocol."
RFC 3413, STD 62, "SNMP Applications."
RFC 3414, STD 62, "User-Based Security Model (USM) for
Version 3 of the Simple Network Management Protocol
(SNMPv3)."
RFC 3415, STD 62, "View-Based Access Control (VACM) for the
Simple Network Management Protocol (SNMP)."
RFC3416, STD 62 "Version 2 of the Protocol Operations for the
Simple Network Management Protocol."
RFC3417, STD 62, "Transport Mappings for the Simple Network
Management Protocol."
RFC3418, STD 62, "Management Information Base (MIB) for the
Simple Network Management Protocol."
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Advertisement
Table of Contents
