Table of Contents
Advertisement
CLI Command
Document No. 10-300077, Issue 2
Figure 12-8. IP Static ARP Entries Web Page
2. Select CREATE. The Add IP Static ARP Entry Web page is displayed.
See
Figure
12-9.
Figure 12-9. Add IP Static ARP Entry Web Page
3. See
Table 12-6
to configure the Add IP Static ARP Entry Web page
parameters:
Table 12-6. IP Static ARP Parameters
Parameter
Allows you to...
IP Address
Enter an IP address to associate with the Static ARP entry.
MAC Address
Enter the MAC address of a node to which you want to
create a static ARP entry.
4. Click CREATE to save your changes, or CANCEL to restore previous
settings.
To create IP static ARP entries, use the following CLI command:
(configure)# arp <ip-address> <hardware-address>
Configuring IP Routing
12-23
Advertisement
Table of Contents
