Table of Contents
Advertisement
CLI Command
Displaying the IGMP Group Membership Table
Web Agent
Procedure
Document No. 10-300077, Issue 2
To display the IGMP Interface Statistics using the CLI, enter the following
command from configuration mode:
(configure)# show ip igmp statistics
The multicast group table provides information on interfaces that are
members of an IGMP group and contains an expiry time for the entry, IP
address of the group, and the group reporter address.
To display the multicast group table using the Web Agent:
1. In the navigation pane, expand the Routing > IGMP folders, and then
click Group Membership Table.
The IGMP Group Membership Table Web page is displayed in the
content pane. See
Figure
Figure 12-26. IGMP Group Membership Table Web Page
2. To modify the IGMP Group Membership Table, perform one of the
following steps:
Select the entry and click Delete Entry to delete one or more
—
entries.
Click Flush Table to clear the entire table.
—
Click REFRESH to receive the most up-to-date information on
—
the entries in the table.
3. See
Table 12-17
for an definition of the IGMP Group Membership Table
Web page parameters:
12-26.
Configuring IP Routing
12-55
Advertisement
Table of Contents
