Page 1
Avaya Ethernet Routing Switch 5600 Series Regulatory Information NN47201-101, 01.03 (324219-A, Rev. 03) December 2010...
Page 2
Avaya or the applicable third party. Avaya does not guarantee that these links will work all the time and has no control over the availability of the linked pages.
Connecting AC power.............................23 Safety messages.............................25 Chapter 3: Deutsche........................27 Hinweise zur Verwendung..........................27 Installation des Switch auf einem Tisch oder Regal..................27 Installation des Switch in einem Rack......................29 Leistungsdaten..............................34 Leistungsdaten (Wechselstrom und DC)......................34 Wechselstrom-Anschluss..........................36 Sicherheitsinformationen..........................38 Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 4
Messages de sécurité.............................66 Chapter 6: Português......................69 Antes de você comece............................69 Instalando o ERS 5600 Series em uma tabela ou em uma prateleira............69 Instalando o ERS 5600 Series em uma cremalheira de equipamento............71 Especificações do poder..........................76 Especificações da alimentação de DC da C. A. e...................76 Poder de C.A.
Read the information in this section to learn about regulatory conformities and compliance. International Regulatory Statements of Conformity This is to certify that the Ethernet Routing Switch 5600 Series equipment was evaluated to the international regulatory standards for electromagnetic compliance (EMC) and safety and were found to have met the requirements for the following international standards: •...
CE marking statement (Europe only) EN 55022 statements This is to certify that the Ethernet Routing Switch 5600 Series equipment is shielded against the generation of radio interference in accordance with the application of Council Directive 2004/108/EC. Conformity is declared by the application of EN 55022 Class A (CISPR 22).
EN 55024 statement EN 55024 statement This is to certify that the Ethernet Routing Switch 5600 Series are shielded against the susceptibility to radio interference in accordance with the application of Council Directive 2004/108/EC. Conformity is declared by the application of EN 55024 (CISPR 24).
National Safety Statements of Compliance EN 60950 statement This is to certify that the Ethernet Routing Switch 5600 Series equipment is in compliance with the requirements of EN 60950 in accordance with the Low Voltage Directive. Additional national differences for all European Union countries have been evaluated for compliance.
The following information is provided on the devices described in this document in compliance with the safety requirements of the Norma Oficial Méxicana (NOM): Exporter: Avaya Inc., 4655 Great America Parkway, Santa Clara, CA 95054 USA. Importer: Avaya Communication de México S.A. de C.V.
Regulatory information and safety precautions Exportador: Avaya Inc., 4655 Great America Parkway, Santa Clara, CA 95054 USA. Importador: Avaya Communication de México S.A. de C.V. Av. Presidente Masarik 111 Piso 6, Col Chapultepec Morales Deleg. Miguel Hidalgo México D.F. 11570...
RoHS Directive are Lead (including solder used in PCB’s), Cadmium, Mercury, Hexavalent Chromium, and Bromine. Avaya declares compliance with the European Union (EU) RoHS Directive (2002/95/EC) in that Lead, which is a restricted hazardous substance, is used only in accordance to the exemption(s) to Article 4(1), item 7 granted by the European Union (EU) RoHS Directive (2002/95/EC) in the Annex—"lead in solders for network infrastructure equipment for switching,...
Regulatory information and safety precautions How To Get Help Visit the Avaya Web site to access the complete range of services and support that Avaya provides. Go to www.avaya.com or go to one of the pages listed in the following sections.
Getting technical support from the Avaya Web site Getting technical support from the Avaya Web site The easiest and most effective way to get technical support for Avaya products is from the Avaya Technical Support Web site at www.avaya.com/support. Notices Notice paragraphs alert you about issues that require your attention.
Chapter 2: English Before you begin Ensure the area where you install and use the Avaya ERS 5600 Series switch meets the following environmental requirements: • Ambient temperature between 32° and 106° F (0° and 50° C) • Relative humidity between 10% and 90% noncondensing •...
Page 16
English Attach the rubber feet at the marked locations. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Allow at least 2 inches (5.1 cm) on each side for proper ventilation and at least 5 inches (12.7 cm) at the back for power cord clearance. Installing the switch in an equipment rack Required tool: Phillips screwdriver for attaching brackets to the switch. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 18
The following figures illustrate installing the switch in a rack. Figure 1: Front-mounted rack bracket installation Attach a bracket to each side of the switch. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 19
Installing the switch in an equipment rack Figure 2: Front-mounted rack installation Slide the switch into the rack. Insert and tighten the rack mount screws. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 20
English Figure 3: Rear-mounted rack bracket installation Attach a bracket to each side of the switch. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Slide the switch into the rack. Insert and tighten the rack mount screws. AC and DC power specifications The following table describes the AC and DC power specifications for the Ethernet Routing Switch 5600 Series. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 22
15.4 TD-PWR (2 power supplies) ERS 5650 1000 15.4 TD-PWR 5698TFD 5698TFD 10.5 5.25 1365 1000 5698TFD- 9.5 * 4.75 * 1850 1000 * 15.4 5698TFD- PWR (2 power supplies) Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Harmonized Document HD-21) U.S./Canada/Japan 100 or 120 VAC 50-60 Hz • NEMA5-15P male plug Single phase • UL-recognized (UL stamped on cord jacket) • CSA-certified (CSA label secured to the cord) Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 24
50 Hz Single phase The Ethernet Routing Switch 5600 Series does not have a power switch. When you connect the AC power cord to a suitable AC power outlet, the switch powers up immediately. Connect the AC power cord to the back of the switch, and then connect the cord to a power outlet.
Safety messages Figure 5: Connecting the AC power cord to the Ethernet Routing Switch 5600 Series Safety messages Warning: Installation must be performed by qualified service personnel only. Read and follow all warning notices and instructions marked on the product or included in the documentation.
Page 26
Always assume that fiber optic cables are connected to a light source. Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Chapter 3: Deutsche Hinweise zur Verwendung Achten Sie bei der Installation und Verwendung des Avaya ERS 5600 Series auf die folgenden äußeren Bedingungen: • Raumtemperatur zwischen 0º und 50º C • relative Luftfeuchtigkeit zwischen 10% und 90% (nicht kondensierend) • keine Hitzequellen, wie z. B. Heizungen oder direktes Sonnenlicht, in unmittelbarer Nähe •...
Page 28
Deutsche Figure 6: Installation des Switch auf einem Tisch oder Regal Befestigen Sie die Gummifüße an den angezeigten Stellen. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Belüftung frei und auf der Rückseite mindestens 13 cm, um ausreichend Platz für die Kabel zu gewährleisten. Installation des Switch in einem Rack Benötigtes Werkzeug: Kreuzschraubendreher, um die Winkel am Switch zu befestigen Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 30
• Das Rack muss zu derselben Erdungselektrode geerdet sein, die auch von der Stromversorgung in der Umgebung verwendet wird. Die Erdung muss permanent sein und darf einen Widerstand von 1 Ohm vom Rack zur Erdungselektrode nicht überschreiten. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 31
Installation des Switch in einem Rack Figure 7: Installation des Switch in einem Rack Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 32
Deutsche Bringen Sie auf jeder Seite des Switch einen Winkel an. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 33
Installation des Switch in einem Rack Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Führen Sie den Switch in das Rack ein. Befestigen Sie den Switch mit den dafür vorgesehenen Schrauben am Rack. Leistungsdaten Leistungsdaten (Wechselstrom und DC) Die folgende Tabelle beschreibt die Wechselstrom und DC Energie Spezifikationen für das ERS 5600 Reihe. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 35
5650TD 2,75 5650TD- 10,5 5,25 1000 15,4 5650TD- 5,3 * 2,65 * 600 * 15,4 5650 PWR (2 Spg. Versor- gungs- teile) 1000 15,4 5650 1,.0 5698TF 5698TF D DC Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
5698TF D-PWR DC (2 Spg. Versor- gungs- teile) * pro Spg.Versorgungsteil Wechselstrom-Anschluss Erforderliches Kabel: Stromkabel (Wechselstrom), das die örtlichen elektrischen Sicherheitsvorschriften erfüllt. Angaben zu den einzelnen Netzsteckern finden Sie in. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 37
Wechselstrom 50 Hz einphasig Der ERS 5600 Series hat keinen Netzschalter. Wenn Sie das Stromkabel an eine geeignete Steckdose anschließen, wird der Switch automatisch eingeschaltet. Die Abbildung zeigen, wie Sie das Stromkabel am ERS 5600 Series anschließen. Avaya Ethernet Routing Switch 5600 Series Regulatory Information...
Deutsche Figure 8: Anschluss des Stromkabels (Wechselstrom) am ERS 5600 Series Schließen Sie das Stromkabel an der Rückseite des Switch an, und stecken Sie das Kabel dann in eine Steckdose. Sicherheitsinformationen Warning: Warnung: Die Installation darf nur von qualifiziertem Servicepersonal durchgeführt werden.
Page 39
Denken Sie stets daran, dass Glasfaserkabel an eine Lichtquelle angeschlossen sein können. Danger: Achtung: Gefahr der Explosion, wenn Batterie nach einer falschen Art ersetzt wird. Entledigen Sie sich benutzte Batterien entsprechend den Anweisungen. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 40
Deutsche Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Chapter 4: Español Antes de comenzar Asegúrese de que el área donde va a instalar y utilizar el Avaya ERS 5600 Series cumple los siguientes requisitos medioambientales: • Temperatura ambiente entre 0º y 50º C (32º y 106º F) • Humedad relativa entre el 10% y el 90%, sin condensación •...
Page 42
Español Fije las patillas de goma en los lugares marcados. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
12,7 cm (5 pulg.) en la parte posterior para el cable de alimentación. Instalación del conmutador en un bastidor para equipos Herramienta necesaria: destornillador Phillips para unir los soportes al conmutador Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 44
1 ohmio de resistencia desde el bastidor hasta el electrodo de conexión a tierra. En la Figura se proporcionan instrucciones sobre cómo instalar el conmutador en un bastidor. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 45
Instalación del conmutador en un bastidor para equipos Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 46
Español Coloque un soporte a cada lado del conmutador. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 47
Instalación del conmutador en un bastidor para equipos Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Especificaciones eléctricas Especificaciones de la potencia cc de la CA y La tabla siguiente describe las especificaciones de la potencia cc de la CA y Para el ERS 5600 series. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 49
5650TD -PWR 10,5 5,25 1000 15,4 5650TD -PWR 5,3 * 2,65 * 290 600 * 15,4 5650 PWR (2 fuentes alimenta ción) 1000 15,4 5650 1,.0 5698TF 5698TF D DC Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
* por fuente de alimentación Conexión a CA Cable necesario: cable de alimentación de CA que cumpla los requisitos del código eléctrico local. Consulte la tabla para obtener información sobre los enchufes. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 51
Enchufe macho AS3112-1981 Monofásico El ERS 5600 Series no dispone de un interrupto de alimentación. Al conectar el cable de alimentación d CA a un conector de entrada CA adecuada, el conmutador se activa immediatamente. La figura se muestra cómo conectar el cable de alimentación al ERS 5600 Series.
Asegúrese de que en los conductores de fase se utiliza un fusible o un disyuntor de menos de 240 V CA, 16 A internacional (120 V CA, 15 A en EE.UU.). Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 53
óptica están conectados a una fuente de luz. Caution: Precaución: Riesgo de la explosión si la batería es substituida por un tipo incorrecto. Disponga de las baterías usadas según las instrucciones. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 54
Español Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
• Espace approprié à l'avant et à l'arrière du commutateur pour faciliter l'accès aux câbles. Si vous installez un seul commutateur ERS 5600 Series sur une table ou sur une étagère, assurez-vous que cette surface puisse supporter un poids d'au moins 9,5 à 15 kg (21 à 33 livres).
Page 56
Français Figure 9: Installation du commutateur sur une table ou sur une étagère Fixez les pieds en caoutchouc aux emplacements indiqués. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Remarque: Laissez au moins 5,1 cm (2 po) de chaque côté pour la ventilation et 12,7 cm (5 po) à l'arrière pour le dégagement du cordon d'alimentation. Installation du commutateur dans un rack Outil nécessaire: Un tournevis Philips pour attacher les supports au commutateur. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 58
Le conducteur de terre doit être permanent et ne doit pas dépasser 1 Ohm de résistance du rack au conducteur de terre. La figure fournit des instructions sur l'installation du commutateur dans un rack. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 59
Installation du commutateur dans un rack Figure 10: Installation du commutateur dans un rack Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 60
Français Fixez un support de chaque côté du commutateur. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 61
Installation du commutateur dans un rack Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Glissez le commutateur dans le rack. Insérez les vis de montage en rack et serrez-les. Alimentation: Caractéristiques Alimentation secteur: caractéristiques La table suivante décrit les caractéristiques d'alimentation secteur du ERS 5600 Series. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 63
10,5 5,25 1000 15,4 5650TD- PWR DC 5,3 * 2,65 * 600 * 15,4 5650 PWR (2 alimen tations d'énergi 1000 15,4 5650 PWR DC 1,.0 5698TF 5698TF D DC Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
* par alimentation d'énergie Alimentation secteur: connexion Câble requis: Un cordon d'alimentation conforme aux conditions de votre code électrique local. Reportez-vous au tableau pour les caractéristiques des prises. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 65
Monophasé Prise mâle AS3112-1981 ERS 5600 Series ne possède pas de commutateur d'alimentation. Lorsque vous connectez le cordon d'alimentation à une sortie d'alimentation secteur appropriée, le commutateur s'allume immédiatement. La figure décrivent la manière de connecter le câble d'alimentation au ERS 5600 Series.
Français Figure 11: Connexion du cordon secteur au ERS 5600 Series Connectez le cordon d'alimentation à l'arrière du commutateur, puis à une source d'alime Messages de sécurité Warning: Avertissement: L'installation ne doit être effectuée que par des personnes qualifiées. Lisez toutes les notices et instructions d'avertissement indiquées sur le produit ou dans la...
Page 67
Supposez toujours que les câbles de fibres optiques sont connectés à une source de lumière. Caution: Avertissement: Risque d'explosion si la batterie est remplacée par un type incorrect. Débarassez-vous des batteries utilisées selon les instructions. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 68
Français Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Você pode instalar um único Ethernet Routing Switch em toda a superfície plana que puder com segurança suportar o peso do ERS 5600 Series e dos cabos unidos (21 a 33 libras ou 9,5 a 15 quilogramas). La figura fornece instruções em instalar o ERS 5600 Series em uma tabela ou em uma prateleira.
Page 70
Português Figure 12: Instalando o ERS 5600 Series na tabela ou na prateleira Una os pés de borracha nas posições marcadas. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Instalando o ERS 5600 Series em uma cremalheira de equipamento Ajuste o ERS 5600 Series em uma tabela ou prateleira. Note: Reserve pelo menos 2 polegadas (5,1 cm) em cada lado para a ventilação apropriada e pelo menos 5 polegadas (12,7 cm) na parte traseira para o afastamento do cabo de poder.
Page 72
área. O trajeto à terra deve ser permanente e não deve exceder 1 ohm da resistência da cremalheira ao elétrodo aterrando. Da figura fornece instruções em instalar o ERS 5600 Series em uma cremalheira. Avaya Ethernet Routing Switch 5600 Series Regulatory Information...
Page 73
Instalando o ERS 5600 Series em uma cremalheira de equipamento Figure 13: Instalando ERS 5600 Series em uma cremalheira Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 74
Português Una um suporte a cada lado do ERS 5600 Series. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 75
Instalando o ERS 5600 Series em uma cremalheira de equipamento Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Português Deslize o ERS 5600 Series na cremalheira. Introduza e aperte cremalheira-montam os parafusos. Especificações do poder Especificações da alimentação de DC da C. A. e A seguinte tabela descreve especificações da alimentação de DC da C. A. e Para o ERS 5600 séries.
Page 77
Especificações da alimentação de DC da C. A. e Table 8: Especificações do poder: série do Ethernet Routing Switch 5600 Series Corrente da entrada Ampères Consum Avaliação A fonte de Ethernet máximos por a fonte de o de térmica alimen exceden alimentação...
* por a fonte de alimentação Poder de C.A. conectando Cabo requerido:Cabo de poder da C.A. que se encontra com as exigências de seu código elétrico local. Consulte à tabela para especificações do plugue. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Page 79
AS3112-1981 plugue masculino monofásica A série de ERS 5600 Series não tem um interruptor de poder. Quando você conectar o cabo de poder da C.A. a uma tomada de poder apropriada da C.A., os poders de ERS 5600 Series acima imediatamente. Da figura mostra como conectar o cabo de poder da C.A. à série de ERS 5600 Series.
Português Figure 14: Conectando o cabo de poder da C.A. à série de ERS 5600 Series Conecte o cabo de poder da C.A. à parte traseira do ERS 5600 Series, e conecte então o cabo a uma tomada de poder.
Page 81
óticos da fibra estão conectados a uma fonte clara. Caution: Cuidado: Risco da explosão se a bateria for substituída por um tipo incorreto. Disponha de baterias usadas de acordo com as instruções. Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010...
Need help?
Do you have a question about the 5600 Series and is the answer not in the manual?
Questions and answers