Disabling Or Enabling Port Redundancy - Avaya 580 User Manual

Disabling or Enabling Port Redundancy

Web Agent
Procedure
CLI Command
Document No. 10-300077, Issue 2
You can globally enable or disable port redundancy in the Port Redundancy
Configuration Web page. Disabling redundancy does not delete the pairs.
To enable or disable a port redundancy
1. In the navigation pane, expand the L2 Switching folder, and then click
Port Redundancy. The Port Redundancy Configuration Web page is
displayed in the content pane.
Figure 8-12. Port Redundancy Configuration Web Page
2. In the Configuration field, select one of the following from the pull-
down menu:
Enable—Enables all existing redundancy pairs.
Disable—Disables all existing redundancy pairs.
All existing redundancy pairs are enabled or disabled.
You can globally enable or disable port redundancy with the CLI. Disabling
redundancy pairs does not delete the pairs.
To enable or disable port redundancy, use the following CLI command:
(configure)# set port-redundancy {enable | disable}
Configuring Ports
8-45