Editing An Appletalk Zone Filter - Avaya 580 User Manual

Chapter 19
CLI Command

Editing an AppleTalk Zone Filter

Web Agent
Procedure
19-20
Table 19-4. Add AppleTalk Zone Filter Web Page Parameters
Parameter Definition
Access List Enter the access list number to be associated with the zone
filter. Valid values are 632-663.
Name Enter the name of the zone to be filtered. You can also leave
this field blank for wildcarding.
Type Select the type of filtering. The options include:
• Deny
• Permit
Interface Select the interface to apply this filter to.
To create an AppleTalk zone filter using the CLI, use the following
command:
(configure)# appletalk access-list <access-list-number> {permit |
deny} zone <string>
You can edit an AppleTalk zone filter using either the Web Agent or the
CLI.
To edit an AppleTalk zone filter using the Web Agent:
1. In the navigation pane, expand the Routing > AppleTalk >
Configuration folders, and then click Zone Filter.
The AppleTalk Zone Filter Web page is displayed in the content pane.
See Figure 19-17.
2. Click the checkbox in the Select column next to the AppleTalk zone
filter that you want to be edit.
3. See Table 19-4 to edit the AppleTalk Zone Filter Web page parameters:.
4. Click:
CREATE to add a new zone filter. The Add AppleTalk Zone
—
Filter Web page is displayed. See
Filter" earlier in this chapter for more information.
DELETE to remove the selected zone filter.
—
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
"Creating an AppleTalk Zone