Avaya 580 User Manual page 346

Chapter 12
Examples
Displaying Short-Lived IP Protocol Filters
CLI Command
Example
12-18
Table 12-4. Keywords, Arguments, and Options
Keyword, Argument, or
Option
{tcp | udp}
<port>
To disable the short-lived IP protocol filter for DNS, enter the following
command:
no ip short-lived udp 53
To disable the short-lived IP protocol filter for NTP, enter the following
command:
no ip short-lived udp 123
To display the short-lived IP protocol filters that are currently enabled, enter
Global Configuration mode and use the following command:
(configure)# show ip short-lived
After you enter the show ip short-lived command, the switch displays the
filters that are currently enabled. For example:
ip short-lived tcp 112
ip short-lived udp 53
ip short-lived udp 123
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Definition
Enter tcp if the protocol that you want to filter
uses a TCP port.
Enter udp if the protocol that you want to
filter uses a UDP port.
The TCP or UDP port number that the
protocol uses.