Configuring A Description For An Ipv6 Peer Or Peer Group; Disabling Session Establishment To An Ipv6 Peer Or Peer Group; Logging Ipv6 Peer Or Peer Group State Changes - HP MSR Series Configuration Manual

Step
4. Allow the establishment of EBGP
connection to an indirectly connected peer
or peer group.

Configuring a description for an IPv6 peer or peer group

Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 address family
view.
4. Configure a description for an
IPv6 peer or peer group.

Disabling session establishment to an IPv6 peer or peer group

Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 address family view.
4. Disable session establishment to an
IPv6 peer or peer group.

Logging IPv6 peer or peer group state changes

Step
1. Enter system view.
2. Enter BGP view.
3. Enable logging of peer
changes globally.
4. Enter IPv6 address family
view.
5. Enable the state change
logging for an IPv6 peer or
peer group.
Command
peer { ipv6-group-name |
ipv6-address } ebgp-max-hop
[ hop-count ]
Command
system-view
bgp as-number
ipv6-family
peer { ipv6-group-name | ipv6-address }
description description-text
Command
system-view
bgp as-number
ipv6-family
peer { ipv6-group-name |
ipv6-address } ignore
Command
system-view
bgp as-number
log-peer-change
ipv6-family
peer { ipv6-group-name |
ipv6-address } log-change
347
Remarks
Not configured by
default.
Remarks
N/A
N/A
N/A
Optional.
Not configured by default.
The peer group to be
configured with a
description must have been
created.
Remarks
N/A
N/A
N/A
Optional.
Not disabled by default.
Remarks
N/A
N/A
Optional.
Enabled by default.
N/A
Optional.
Enabled by default.
For information about the
command, see Layer 3—IP Routing
Command Reference.